TV.SW

...because software can be inexpensive... (or free)

  • Increase font size
  • Default font size
  • Decrease font size
TV.SW

RadioCorder

Sunday, 14 March 2010 00:00 administrator
E-mail Print PDF

RadioCorder Reached maturity v2.0

Version 2.0 Release Notes -- Build 520

NEW in this version.

 

  • LOOP Recording can be set up to 72 Hours.
  • PCM and MP3 Selection records now appropriate files.
  • PATH Editor to set paths, through Audio Settings.
  • Day is now reported correctly independently from TimeZone set at the PC.
  • All Settings forms are now moveable.
  • LAST WINDOW Position is remembered by the application.
  • The Player now displays the Elapsed time according to the recorded time.
  • Audio Card selection now works.
  • Only executable released.
  • GUI Slightly changed.

 

 

 

  • Sync a HAMLIB  Controlled Radio to PERSEUS SDR.
  • Sync a HAMLIB  Controlled Radio to  POWER SDR.
  • RadioCorder Sync SpectraVue to N1MM Logging Software.
  • RadioCorder add POWER SDR Native Protocol.
  • New LOOP Recording feature.
  • RadioCorder in this new version adds PERSEUS SDR Native CI Protocol via Serial Port.
  • Added http://www.woodboxradio.com/uk/BobMeters.html as an S-meter.
  • Supports Ham Radio Deluxe IP Protocol.
  • Uses Ham Radio Deluxe  DDE protocol, SpectraVue or HAMLIB depending on which mode you select via Setup or INI file.
  • It can sync a HAMLIB controlled radio with Spectravue for SDR.
  • It can sync an Ham Radio Deluxe conrolled Radio with SpectraVue for SDR.
  • Schedule is editable for both recordings, monitoring or transmitting events.
  • Schedule has look ahead capability.
  • Built in Support for controlling parallel or serial port.
  • VOX capability.
  • QSL export in .jpg file.
  • Recording Path can be set as redundant.
  • Built in player for the recorded MP3.
  • Player has the ability to playback half the speed to easily identify transmissions.
Setup Instructions: 
or
1. Download executable only: LATEST UPDATE (21-03-2010). Build 2.0.520 http://www.tv-sw.com/RadioCorder/RadioCorder.exe 
!!! DELETE OLD SETTINGS.INI FILE !!! 
2. Setup.
3. For HAMLIB controlling PERSEUS SDR, add "HAMLIB+PERSEUS" protocol  through the Radio Settings menu.
4. For HAMLIB controlling POWER SDR, add "HAMLIB+FlexRadio" protocol  through the Radio Settings menu. 
5. For N1MM controlling Spectravue, add "SV+N1MM"  protocol  through the Radio Settings menu.   
6. For POWER SDR, install Power SDR, add "FLEXRADIO" protocol  through the Radio Settings menu.
7. For PERSEUS SDR, install Perseus, add "PERSEUS" protocol through the Radio Settings menu.
8. You may install a virtual port emulator like http://www.eterlogic.com/Products.VSPE.html to support Perseus.
9. For HRD DDE Control Install Ham Radio Deluxe and setup DDE control. Add "HRD" Protocol through the Radio Settings menu.
10. For HAMLIB Control, all libraries are included. Add "HAMLIB" Protocol through the Radio Settings menu.  
11. For HRD IP Control  Install Ham Radio Deluxe and setup IP Server. Add "HRD5-IP"  Protocol through the Radio Settings menu.
12. For SpectraVue Install and Run Spectravue. Add "SV"  Protocol through the Radio Settings menu.
13. You can sync HRD to SpectraVue and HAMLIB to SpectraVue by selecting "SV+HRD" or "SV+HAMLIB" Protocols.
    SpectraVue is always the Slave Radio. 
 

 
PLANS
* Add support for TV and Radio cards. March 2010.
* Re-Write the User Manual. March 2010.
* Add support for Internet Radio Stations and Streaming Recording. May 2010. 

More Info ....  This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
 
 
Version 2.0 ScreenShots 

   

 

 

 

 

 

All Frequencies, data and tasks in the above screenshots are indicative.

Last Updated on Sunday, 21 March 2010 20:30